Table of Contents
Advertisement
CONNECTION PROCEDURE
The PR150/SP1B, PR150/SP2B, PR1500/SP7B and PR1500/SP8B are
designed to be safe under the following conditions:
indoor use
altitude up to 2000 m
temperature 0°C to + 50°C
maximum relative humidity 80% for temperatures up to 31°C
decreasing linearly to 40% relative humidity at 50°C
Use of the probe on uninsulated conductors is limited to 600V RMS or
DC and frequencies below 1 kHz. Safety in its use is the responsibility of
the operator who must be a suitably qualified or authorized person.
When using the probe ensure that your fingers are behind the protective
barrier (see Figure 1).
Do not use the probe if any part of the probe including the lead and
connector(s) appear to be damaged or if a malfunction of the instrument
is suspected. Clean the case periodically by wiping it with a damp cloth
and detergent. Do not use abrasive cleaners or solvents. Do not
immerse the probe in liquids.
WARNING
To reduce the risk of fire, electrical shock, or physical injury it is
strongly recommended to make connections to the instrument with
all circuits de-energized. If it is necessary to make connections on
energized circuits they must be made by Qualified personnel ONLY.
The National Electrical Code defines a qualified person as "one who has
the skills and knowledge related to the construction and operation of the
electrical equipment and installations, and who has received safety
training on the hazards involved."
Qualified personnel that work on or near exposed energized electrical
conductors must follow applicable safety related work practices and
procedures including appropriate personal protective equipment in
compliance with the Standard for Electrical Safety Requirements for
Employee Workplaces (ANSI/NFPA 70E-2012) of USA and any
additional workplace safety requirements applicable to your installation.
Always refer to the applicable User's Guide for additional information
concerning installation, operation, and connections of Dranetz or Original
Equipment Manufacturer's instructions applicable to your installation.
7
Advertisement
Table of Contents
