Table of Contents
Advertisement
Voltage/Current Pods (for Voltage/Current Input Module - Model 61MZP): Connects to
Measurement
cables, probes
the Series 5500 Voltage/Current input module via the 25-PIN interface cable connector
and pods
on the rear panel of the instrument. See page 2-28 for more information on voltage/
(continued)
current input pod connection.
The next pages describe the possible voltage and current assembly connections to the
input connectors in the rear panel of 61000.
NOTE:
VOLTAGE AND CURRENT PROBES ARE NOT SHOWN CONNECTED TO
THE SPECIFIC INPUT MODULES IN THE CONNECTION DIAGRAMS
PROVIDED BECAUSE THE ACTUAL VOLTAGE CABLE AND CURRENT
PROBES USED ARE DEPENDENT ON THE TYPE OF INPUT MODULES
AND OPTIONAL ACCESSORIES PURCHASED.
See Chapter 3 Circuit Diagrams for Power Monitoring for the wiring connection
diagrams to set up the instrument for monitoring.
Chapter 2/ Controls, Indicators, and Connectors
2-17
Advertisement
Table of Contents
