Table of Contents
Advertisement
Configuring the Encore 61000 DataNode for Modem Communication, continued
STEP 3: Configure the 61000 communications for modem operation.
Procedure
(continued)
Setup icon
4-10
3.1 Open a web browser e.g. Internet Explorer and type in the default IP
address 192.168.0.20 in the address bar.
3.2 When done entering IP address, click on the Go button or press return. The
61000 log-in screen will de displayed.
•Enter the user-configured User name and Password.
•If the User name and Password have not been configured by the user, use
the following default settings: type in admin for User name and
password for Password.
NOTE: Use lowercase characters when entering user name and
password.
3.3 After typing in the user name and password, click on the OK button. The
61000 Home Page will be displayed.
Continued on next page
Advertisement
Table of Contents
