Table of Contents
Advertisement
Safety Summary,
The following safety precautions must be followed whenever any type of voltage or
Safety
precautions
current connection is being made to the 61000.
• Connect the green safety (earth) ground first, before making any other connections.
• When connecting to electric circuits or pulse initiating equipment, open their related
breakers. DO NOT install any connection of the instrument on live power lines.
• Connections must be made to the instrument first, then connect to the circuit to be
monitored.
• Wear proper personal protective equipment, including safety glasses and insulated
gloves when making connections to power circuits.
• Hands, shoes and floor must be dry when making any connection to a power line.
• Make sure the unit is turned OFF before connecting probes to the rear panel.
• Before each use, inspect all cables for breaks or cracks in the insulation. Replace
immediately if defective.
• Pods should be connected first to the 61000, then connect to the circuit to be
monitored.
• If the equipment is used in a manner not specified in this user's guide, the protection
provided by the equipment may be impaired.
These safety precautions are repeated where appropriate throughout this manual.
vi
Continued
Advertisement
Table of Contents
