Download Data via USB Connection
Download Data via USB Connection
Procedure
5-22
Shop for Power Metering products online at:
The following procedure shows how to download data via a USB connection.
Step
1
Plug the small end of the USB active sync cable into the small USB
connector on the right side of the HDPQ instrument. Plug the other end into
the USB connector on your computer.
2
The HDPQ instrument will plug & play, and the Windows
will open automatically.
3
In your device, look under File Management, and click on Browse
Contents.
4
Navigate to the folder directory: Computer\HDPQ\Flash\User. You should
see the following folders:
• screens - contain all screen snapshots not associated with a mini report
• reports - contain the Mini Reports
• setups - contain the Setup files
• archive - contains the ddbx data folders
5
Click on any folder to see the available files to download. Proceed to select
and right-click on a file and select Copy.
®
6
Using Windows
upload the data. Right click and select paste to transfer the data to your
computer.
PowerMeterStore
www.
Action
Explorer, navigate to the folder where you would like to
®
Mobile window
1.877.766.5412
.com