EP-MVP3G-M/2/5
I/O Shield Connector
The EP-MVP3G-M/2/5 is equipped with an I/O back panel.Please use the appro-
priate I/O shield (figure 3).
PS/2 Mouse
PS/2 Keyboard
Power-On/Off (Remote)
The EP-MVP3G-M/2/5 has a single 20-pin connector for ATX power supplies.
For ATX power supplies that support the Remote On/Off feature, this should be
connected to the systems front panel for system Power On/Off button. The
systems power On/Off button should be a momentary button that is normally open.
The EP-MVP3G-M/2/5 has been designed with "Soft Off" functions. You can
turn Off the system from one of two sources: The first is the front panel Power
On/Off button, and the other is the "Soft Off" function (coming from the EP-
MVP3G-M/2/5's onboard circuit controller) that can be controlled by the operat-
ing system. Windows 95/98 will control this when the user clicks that they are
ready to Shutdown the system.
J3
Case (chassis) Power
ON/OFF button
USB
COM1
Figure 3
ATX
POWER SUPPLY
Figure 4: Simple ATX Power
ON/OFF Controller
Introduction
Parallel Port
COM2
Page 1-3