Award Bios Setup; Bios Instructions - EPOX EP-MVP3G-M User Manual

EP-MVP3G-M/2/5

BIOS Instructions

Award's ROM BIOS provides a built-in Setup program which allows user to
modify the basic system configuration and hardware parameters. The modified
data will be stored in a battery-backed CMOS, so that data will be retained even
when the power is turned off. In general, the information saved in the CMOS RAM
will stay unchanged unless there is a configuration change in the system, such as
hard drive replacement or a device is added.
It is possible for the CMOS battery to fail, this will cause data loss in the CMOS
only. If this does happen you will need to reconfigure your BIOS settings.
To enter the Setup Program :
Power on the computer and press the <Del> key immediately, this will bring you
into the BIOS CMOS SETUP UTILITY.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
INTEGRATED PERIPHERALS
LOAD SETUP DEFAULTS
ESC : QUIT
F10 : Save & Exit Setup
ROM PCI/ISA BIOS(2A5LEPAE)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Time, Date, Hard Disk Type...
Figure 4-1 CMOS SETUP UTILITY

AWARD BIOS SETUP

SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: SELECT ITEM
(Shift)F2 : Change Color
BIOS
Section 4
Page 4-1