User Notice - EPOX EP-MVP3G-M User Manual

User Notice

No part of this product, including the product and software may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form without the express written permission of EPoX Computer
Company (hereinafter referred to as EPoX) except for documentation kept by the
purchaser for backup purposes.
We provide this manual "as is" without warranty of any kind, either expressed or
implied, including but not limited to the implied warranties or conditions of
merchantability or fitness for a particular purpose. In no event shall EPoX be
liable for any loss of profits, loss of business, loss of use or data, interruption of
business or for indirect, special incidental, or consequential damages of any kind,
even if EPoX has been advised of the possibility of such damages arising from any
defect or error in the manual or product. EPoX may revise this manual from time
to time without notice. For updated BIOS, drivers, or product release information
you may visit our websites at http://www.epox.com or http://www.epox.com.tw.
Products mentioned in this manual are mentioned for identification purposes only.
Product names appearing in this manual may or may not be registered trademarks
or copyrights of their respective companies. The product name and revision
number are both printed on the mainboard itself.
Handling Procedures
Static electricity can severely damage your equipment. Handle the EP-MVP3G-
M/2/5 and any other device in your system with extreme care and avoid unneces-
sary contact with system components on the mainboard. Always work on an
antistatic surface to avoid possible damage to the mainboard from static discharge.
Always have the power supply unplugged and powered off when inserting and
removing devices within the computer chassis. EPoX assumes no responsibility
for any damage to the EP-MVP3G-M/2/5 mainboard that results from failure to
follow instruction or failure to observe safety precautions.
* The EP-MVP3G-M/2/5 mainboard is subject to damage by static electricity.
Always observe the handling procedures.
* We strongly recommend power source "OFF" while installation, or plug-in
power cable or plug power supply into onboard power connector at last step.
CAUTION
EP-MVP3G-M/2/5