Configure Jumpers; System Memory Configuration; Device Connectors; External Modem Ring-In Power On And Keyboard Power On Function (Kbpo) - EPOX EP-MVP3G-M User Manual

EP-MVP3G-M/2/5
The following must be completed before powering on your new system:

3-1. Configure Jumpers

3-2. System Memory Configuration

3-3. Device Connectors

3-4. External Modem Ring-in Power On and Keyboard Power On
Function (KBPO)
We design this motherboard with the fewest jumpers to make your install fast and
easy.
Note: The jumpers as shown below are in their correct physical orientation.
(Figure 1)
JP1
JP4
JP5
CMOS Clear
1-2: Normal (Default)
2-3: Clear CMOS
Keyboard Power-ON Function
1-2: Disabled (Default)
2-3: Enabled
SDRAM Clock Selection
1-2: SDRAM = AGP (2/3 CPU Clock)
2-3: SDRAM = CPU (Default)
Installation
Page 3-3