Pnp/Pci Configuration - EPOX EP-MVP3G-M User Manual

EP-MVP3G-M/2/5

4-5 PNP/PCI CONFIGURATION

The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ signals
when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING : Any misplacing IRQ could cause system can't pick out the rescouces.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
Figure 4-6 PCI CONFIGURATION SETUP
PNP OS Installed: Do you have a PNP OS installed on your system.
The default is No.
Yes: Select if you are using a PNP OS
No: Select if your OS does not support PNP.
Resources Controlled By:The default value is Auto.
Manual: The field defines that the PNP Card's resource is controlled by
manual. You can setup whether IRQ-X or DMA-X is assigned to PCI/
ISA PNP or Legacy ISA Cards.
Auto: If your ISA card and PCI card are all PNP cards. Set this field to
"Auto". The BIOS will assign the interrupt resource automatically.
ROM PCI/ISA BIOS (2A5LEPAE)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: No CPU ot PCI Write Buffer
: Auto PCI Dynamic Bursting
: Disabled PCI Master 0 WS Write
PCI Delay Transaction
PCI#2 Access #1 Retry
AGP Master 1 WS Write
AGP Master 1 WS Read
PCI IRQ Actived By
Assign IRQ For USB
Assign IRQ For VGA
ESC : Quit
F1 : Help
F5
F7 : Load Setup Defaults
PU/PD/+/-
1: No Change (Shift) F2 : Color
BIOS
: Enabled
: Enabled
: Enabled
: Disabled
: Disabled
: Enabled
: Disabled
: Level
: Enabled
: Enabled
: Select Item
: Modify
Page 4-13