BIOS
4-8
4-8
CHANGE SUPERVISOR or USER PASSWORD
CHANGE SUPERVISOR or USER PASSWORD
4-8
4-8 CHANGE SUPERVISOR or USER PASSWORD
4-8
CHANGE SUPERVISOR or USER PASSWORD
CHANGE SUPERVISOR or USER PASSWORD
To change the password, choose the "SUPERVISOR PASSWORD or USER PASS-
WORD " option from the CMOS SETUP UTILITY menu and press [Enter].
NOTE : Either "Setup" or "System" must be selected in the "Security Option" of the
BIOS FEATURES SETUP menu (Refer to Figure 3-3 for the details).
1. If CMOS is corrupted or the option is not used, a default password stored in the
ROM will be used. The screen will display the following message:
Press the [Enter] key to continue after proper password is given.
2. If CMOS is corrupted or the option was used earlier and the user wish to change
default password, the SETUP UTILITY will display a message and ask for a
confirmation.
3. After pressing the [Enter] key (ROM password if the option was not used) or
current password (user-defined password), the user can change the password and
store new one in CMOS RAM. A maximum of 8 characters can be entered.
Page 4-20
Enter Password:
Confirm Password:
EP-MVP3G-M/2/5