Ep-Mvp3G-M/2/5 Form-Factor - EPOX EP-MVP3G-M User Manual

Introduction
EP-MVP3G-M/2/5 Form Factor
The EP-MVP3G-M/2/5 is designed with ATX form factor - the new industry
standard of chassis. The ATX form factor is essentially a Baby-AT baseboard
rotated 90 degrees within the chassis enclosure and a new mounting configuration
for the power supply. With these changes the processor is relocated away from the
expansion slots, allowing them all to hold full length add-in cards. ATX defines a
double height aperture to the rear of the chassis which can be used to host a wide
range of onboard I/O. Only the size and position of this aperture is defined,
allowing PC manufacturers to add new I/O features (e.g.; TV input, TV output,
joystick, modem, LAN, etc.) to systems. This will help systems integrators
differentiate their products in the marketplace, and better meet your needs.
• Smaller size promotes a smaller system size.
• I/O shield does not need to be retooled in an ATX 2.01 or later. Mainboard
could be used in an ATX 2.01-compliant.
• A smaller power supply cam be used. High integration on mainboard reduces
the system costs.
Expandable I/O
Full length
slots
Floppy / IDE
connectors
close to
peripheral
bays
Page 1-2
3 1/2"
Bay
Figure 2: Summary of ATX chassis features
EP-MVP3G-M/2/5
Single chassis
fan for
system
ATX
Power
Supply
CPU located near
Power Supply
ATX power
connector
5 1/4"
Bay