EPOX EP-MVP3G-M User Manual page 20

Installation
(This is connected to the power button on the case. Using the Soft-
Off by Pwr-BTTN feature, you can choose either Instant Off (turns
system off immediatly), or 4 sec delay (you need to hold the button
down for 4 seconds before the system turns off). When the system is
in 4 sec delay mode, there is a special feature to make the system to
go into suspend mode when the button is pressed momentarily.)
Power On/Off
J3
1
Turbo LED indicator -
+
IDE LED indicator -
+ is activate
IR Connector
1
J2 Power LED -
1
Speaker -
1
Reset -
1
Page 3-8
LED ON when Onboard PCI IDE Hard disks
1. VCC
2. NC
3. IRRX
Power LED connector
1. Power LED(+)
2. N/C
3. GND
Connect to the system's speaker for beeping
1. Speaker
2. N/C
Closed to restart system.
EP-MVP3G-M/2/5
LED ON when higher speed is selected
4. GND
5. IRTX
4. NC
5. GND
3. GND
4. GND