Bios Features Setup - EPOX EP-MVP3G-M User Manual

EP-MVP3G-M/2/5
Note: If the Primary Master/Slave and the Secondary Master/Slave are
set as "Auto", the hard disk size and model will be auto-detected.
Note: The "Halt On :" field is to determine when to halt the system by the
BIOS if an error occurrs.

4-2 BIOS FEATURES SETUP

By selecting the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY
menu, user can change system related parameters in the displayed menu. This menu
shows all of the manufacturer's default values of this mainboard. Again, user can move
the cursor by pressing direction keys and <PgDn> or <PgUp> keys to modify the
parameters. Pressing [F1] key to display help message of the selected item.
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Memory Parity/ECC Check
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Type matic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB
HDD S.M.A.R.T. capability
Report No FDD For WIN 95
Virus Warning: This category flashes on the screen. During and after the system
boots up, any attempt to write to the boot sector or partition table of the hard disk
drive will halt the system and an error message will appear. You should then run an
anti-virus program to locate the virus. Keep in mind that this feature protects only
the boot sector, not the entire hard drive. Default value is Disabled.
ROM PCI/ISA BIOS (2A5LEPAE)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled
: Enabled
: Enabled
: Enabled
: A, C, SCSI
: Disabled
: Enabled
: On
: Fast
: Disabled
: Disabled
: 6
: 250
: Setup
: Disabled
: Non-OS2
: Disabled
: Yes
Figure 4-3 BIOS FEATURES SETUP
Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow
Esc : Quit
F1 : Help
F5 : Old Values
F7 : Load Setup Defaults
BIOS
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
Page 4-3