Pnp/Pci Configuration - EPOX EP-8HDA5J User Manual

BIOS
PowerOn by PCI Card
An input signal from PME on the PCI card awakens the system from soft-off state.
Options: Enabled, Disabled.
PowerOn by OnBoard LAN
This item allows you to power on the system by onboard LAN from soft-off state.
Options: Enabled, Disabled.
Modem Ring Resume
When set to "Enabled", any event occurring to the Modem Ring will awaken the
system from suspend state.
Options: Enabled, Disabled.
RTC Alarm Resume
When set to Enable rtc alarm resume, you can set the date (of month) and time (hh:
mm:ss), that will awaken a system which has been powered down.
Options: Enabled, Disabled.

4-6 PNP/PCI Configuration

This page lets the user to modify the PCI IRQ signals when various PCI cards are
inserted.
WARNING: Conflicting IRQ's may cause system unable to locate certain devices.
Figure 7: PNP/PCI Configuration Setup
Page 4-19