EP-6WEA4/4I
The following must be completed before powering on your new system:
3-1.
Configure Jumpers to match your hardware
3-2.
System Memory Configuration
3-3.
Install Pentium
3-4.
Device Connectors
3-5.
External Modem Ring-in Power ON and Keyboard Power ON
Functions (KBPO)
3-6.
STR (Suspend To RAM) Function
We design this mainboard with the a few jumpers to make your installation fast
and easy.
The following will describe all of the jumpers that you are required to set.
JP1
JP13
1
®
®
II or Pentium
III Processor
CMOS Clear
JP1 = 1-2 Normal (Default)
= 2-3 Clear CMOS
Keyboard Power-ON Function
JP13 = 1-2 Enabled
= 2-3 Disabled (Default)
Installation
Page 3-3