Product Certifications - Emerson Rosemount 8800D Series Quick Start Manual

Quick Start Guide
3.0 Safety instrumented systems installation
For safety certified installations, refer to the Rosemount 8800D Safety Manual
(Document # 00809-0200-4004) for installation procedure and system
requirements.

4.0 Product Certifications

4.1 Flameproof enclosure Ex d protection type in accordance
with IEC 60079-1, EN 60079-1
Transmitters with Flameproof enclosure type protection shall only be opened

when power is removed.
Closing of entries in the device must be carried out using the appropriate Ex d

cable gland or blanking plug. Unless otherwise marked on housing, the
standard conduit entry thread forms are 1/2-14 NPT.
Type n protection type in accordance with IEC 60079-15, EN60079-15
Closing of entries in the device must be carried out using the appropriate Ex e or
Ex n cable gland and metal blanking plug or any appropriate ATEX or IECEx
approved cable gland and blanking plug with IP66 rating certified by an EU
approved certification body.
4.2 European Directive Information
The CE Declaration of Conformity for all applicable European directives for this
product can be found on our website at www.emersonprocess.com/rosemount.
A hard copy may be obtained by contacting our local sales office.
4.3 ATEX Directive
Emerson Process Management complies with the ATEX Directive.
20
April 2016