Advertisement
Quick Installation Guide
00825-0100-4379, Rev DA
October 2008
P
C
RODUCT
ERTIFICATIONS
NOTE
The Rosemount 753R is intended for monitoring purposes only.
The Rosemount 753R is intended for web based monitoring applications and is not
designed to integrate into process control systems.
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Telecommunication/EMC Compliance
FCC ID: IHDT56FV1
IC ID: 109O-FV1 is contained within.
This device has met the applicable EMC requirements of EN 61326: 2006.
This device has met the applicable requirements of the R&TTE Directive.
Ordinary Locations Certifications for FM
As standard, the transmitter has been examined and tested to determine that the design
meets basic electrical, mechanical, and fire protection requirements by FM, a nationally
recognized testing laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
Hazardous Locations Certifications
USA and Canadian Certifications
Factory Mutual (FM) Approvals
N5 FM Class I, Division 2
USA Certificate Number: 3023264
Canadian Certificate Number: 3027229
Class I, Division 2, Groups A, B, C, and D;
Temperature Class T4 Ta = 70° C
Enclosure Type 3R
Note: To maintain a Type 3R enclosure, the solar panel must be pointed upwards.
WARNING
Substitution of components may impair suitability for Division 2.
Explosion Hazard. Do not disconnect equipment when a flammable or combustible
atmosphere is present.
Explosion Hazard. Do not open enclosure or replace battery when flammable or
combustible atmosphere is present.
1
Rosemount 753R Indicator
15
Advertisement
