Wfq Queuing Configuration Commands; Display Qos Wfq Interface - HP A8800 Series Command Reference Manual

To guarantee that the queue scheduling is exact, make sure that the queues assigned to a WRR group are
continuous.
Examples
# Create queue scheduling profile myprofile and configure queue 1 to use SP.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile] queue 1 sp
# Create queue scheduling profile myprofile, configure queue 1 to use WRR, set the scheduling weight
of queue 1 to 20, and assign queue 1 to WRR priority group 1.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile] queue 1 wrr group 1 weight 20

WFQ queuing configuration commands

WFQ configuration commands are applicable to only SPE cards

display qos wfq interface

Syntax
display qos wfq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos wfq interface to display the weighted fair queuing (WFQ) configuration on an interface.
If no interface is specified, the WFQ configuration of all the interfaces is displayed.
Related commands: qos wfq.
Examples
# Display the WFQ configuration of GigabitEthernet 2/1/1.
90