Troubleshooting Hardware Issues; Starting An Appliance That Does Not Turn On - Symantec NetBackup 5030 Troubleshooting Manual

Troubleshooting Hardware
Issues
This chapter includes the following topics:
■
■
■
■
■
■

Starting an appliance that does not turn on

This section provides suggestions you can use to ensure that the appliance is on.
Possible causes include the following:
■
■
■
To ensure that the power is on, do the following
1
Starting an appliance that does not turn on
Troubleshooting an amber drive status LED on the appliance
Troubleshooting a system drive that the management software does not identify
Troubleshooting appliance power supply problems
Troubleshooting system-induced shutdown
Troubleshooting system status LED issues
The AC power plug is not inserted properly.
AC power is not supplied from the power source.
Appliance is not turned on.
Check the AC power LED and the system status LED on the control panel.
If the AC power LED is off and the system status LED is green, push the
■
AC power button to turn on the power.
Chapter
8