Chapter 9 Removing And Replacing Appliance Hardware Components; Overview - Symantec NetBackup 5030 Troubleshooting Manual

Removing and replacing
appliance hardware
components
This chapter includes the following topics:
■
■
■
■
■
■

Overview

This chapter provides information that describes how to remove and replace faulty
components from NetBackup appliance. Some components are hot-swappable.
Care must be taken to ensure that hot-swappable components are in a safe state
before they are removed. Inappropriate removal of a hot-swappable component
can disrupt system operation and result in data loss and data corruption. Contact
Symantec Technical Support immediately if a component is removed inappropriately
or the replacement part does not resolve the fault.
When handling electrical components, be sure to always apply appropriate ESD
preventative measures. Do the following:
Overview
Removing and replacing the bezel
Removing and replacing NetBackup 5230 disk drives
Removing and installing a NetBackup 5030 or NetBackup 5230 power supply
Removing and replacing NetBackup 5220 Appliance storage drives
Removing and replacing a NetBackup 5220 Appliance power supply
Chapter
9