▪
For stubborn spots on the leather, apply a mild, nonabrasive soap solution with a clean, wet
sponge.
Rinse well and let it air dry.
▪
For butter, oil, or grease, wipe the leather with a clean, dry cloth and let the remainder of the oil
dissipate into the leather.
Do not apply water or try to wash a grease spot.
▪
Do not use saddle soap, cleaning solvents, oils, furniture polishes, varnishes, abrasive cleaners,
detergents, or ammonia on leather; they will ruin the finish, causing it to become sticky and cracked.
▪
For regular cleaning of the polished aluminum chair components, apply a pre-softened paste wax to
the polished aluminum following the manufacturer's instructions.
In humid atmospheres near salt water, apply the wax once a month. In other areas, apply the wax
every three months to maintain the appearance of the aluminum.
Clean Power Pockets
If a spill occurs in or around Power Pockets, wipe it up immediately. If you notice data collaboration
problems after a spill, contact your organization's IT department.
Procedure
» Dust with a feather duster and keep free of debris.
Clean Displays
Do not use cleaners that contain acetone, ethyl alcohol, ethyl acid, ammonia, or methyl chloride.
Procedure
» Gently wipe the screens with a very soft, lint-free cloth (microfiber is recommended) and a liquid
cleaning solution that contains water, vinegar and water, or isopropyl alcohol, such as Monster
screen cleaner.
Spray the liquid cleaning solution directly on the cloth and clean in a circular motion.
Clean Light Fixtures
Clean the lenses with a dry cloth only.
Procedure
» Turn off the power and then wipe the fixtures with a soft, lint-free cloth.
Clean Tablet
Keep the touch device free of dirt and dust.
Polycom, Inc.
Recommended Cleaning Procedures
20