Pair A Previously Paired Realpresence Touch Device; View Realpresence Touch Device Details; View System Details And Connection Status For A Room System; Generate Touch Tones - Polycom RealPresence OTX Studio User Manual

Pair a Previously Paired RealPresence Touch Device

If your connection to a paired RealPresence Immersive Telepresence system is lost, you need to pair to
that system again.
Procedure
1. After the system is unpaired, you might see a "Searching" message as the device tries to pair
automatically. To pair the device manually, tap Cancel.
2. On the Recently Paired tab, tap the RealPresence Immersive Telepresence system that you want
to pair.
The pairing connection begins.

View RealPresence Touch Device Details

You can view certain device details to perform troubleshooting tests to provide information for your
administrator.
You can view details about your device when out of a call.
Procedure
1. On any screen, tap
The System Information screen displays.
2. Under Device Connection Status, tap the RealPresence Touch device name.
Device details are listed for your RealPresence Touch device.
View System Details and Connection Status for a
Room System
At times, you need to view certain system details to perform troubleshooting tests to provide information
for your administrator.
Procedure
1. On any screen, tap
2. Under Device Connection Status, tap the room system that you want information on.
System details and connection status information is listed for the connected room system.

Generate Touch Tones

In some environments, you need to use touch tones. You can generate (DTMF) touch tones in a call
using the touch device.
Procedure
1. Tap Touch Tones.
Polycom, Inc.
Menu and then Settings.
Menu and then Settings.
Using the Polycom RealPresence Touch Device
9