Table of Contents
Advertisement
In order for the pluggable equipment to be disconnected from the supply, the socket outlets can be easily
accessed by removing the panel immediately to the left of the equipment rack as shown in the next figure.
Important Safeguards for RealPresence Immersive
Studio
Regulatory notices describe safety and legal considerations for using the RealPresence Immersive Studio
system.
Save These Instructions
Read and understand the following instructions before using the system:
▪
Always disconnect the system from power before cleaning or servicing.
▪
Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static-
free cloth.
▪
Do not place any liquids on the system.
▪
Do not disassemble this system. To reduce the risk of shock and to maintain the warranty on the
system, a qualified technician must perform service or repair work.
▪
Avoid using this system during an electrical storm. There may be a remote risk of electric shock
from lightning.
▪
Do not service any parts in compartments that require a tool to access.
▪
This system is considered to be Pluggable Equipment Type A. The socket outlets must be installed
near the equipment and be easily accessible.
System Rating for RealPresence Immersive Studio
120/220-240 V~,15/8 A, 50/60 Hz
Note:
This equipment uses multiple disconnects. See the instructions below for quick
disconnect of the racks and lighting controller. Please disconnect all before servicing.
The main system consists of three independent electronics rack units which are considered "pluggable
equipment." The room lighting system is considered to be "permanently connected equipment."
Polycom, Inc.
Regulatory Information
23
Advertisement
Table of Contents
