Table of Contents
Advertisement
Regulatory Information
Topics:
▪
Important Safeguards for RealPresence OTX Studio
▪
Important Safeguards for RealPresence Immersive Studio
▪
Important Safeguards for RealPresence Immersive Studio Flex
This section covers important safeguards and the system rating for RealPresence OTX Studio and
RealPresence Immersive Studio systems.
Important Safeguards for RealPresence OTX Studio
Regulatory notices describe safety and legal considerations for using the RealPresence OTX Studio
system.
Save These Instructions
Read and understand the following instructions before using the system:
▪
Always disconnect the system from power before cleaning or servicing.
▪
Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static-
free cloth.
▪
Do not place any liquids on the system.
▪
Do not disassemble this system. To reduce the risk of shock and to maintain the warranty on the
system, a qualified technician must perform service or repair work.
▪
Avoid using this system during an electrical storm. There may be a remote risk of electric shock
from lightning.
▪
Do not service any parts in compartments that require a tool to access.
▪
Service personnel must take particular care when removing any monitor lift compartment covers for
servicing due to potentially moving parts.
▪
This system is considered to be Pluggable Equipment Type A. The socket outlets must be installed
near the equipment and be easily accessible.
▪
The user accessible socket outlets provided with this system carry a maximum load rating of 2A per
socket.
▪
Keep hands and objects clear when the monitor is in motion.
System Rating for RealPresence OTX Studio
12x 120/220-240 V~,15/8 A, 50/60 Hz
Note:
This equipment uses multiple disconnects. See the instructions below for quick
disconnect of all electronic items. Please disconnect all before servicing.
The main system consists of an equipment rack, media wall, and main table. All contain mains powered
electronic components which are considered to be Pluggable Equipment Type A. The room lighting
system is considered to be Permanently Connected Equipment.
Polycom, Inc.
22
Advertisement
Table of Contents
