Content; Connect Your Computer To The Room System; Supported Resolutions And Refresh Rates For Content - Polycom RealPresence OTX Studio User Manual

Content

Topics:
▪

Connect Your Computer to the Room System

▪

Supported Resolutions and Refresh Rates for Content

▪ Share Content with a RealPresence Immersive Studio or RealPresence Immersive Studio
Flex System
▪ Stop Sharing Content
▪ Share Content Using VisualBoard
▪ Stop Sharing Content from VisualBoard
You can share content from a computer that is connected to your RealPresence Immersive Studio or
RealPresence OTX Studio system.
Connect Your Computer to the Room System
To share content, you must connect your computer to the RealPresence Immersive Studio or
RealPresence OTX Studio system.
Procedure
» Connect the computer by using the HDMI or VGA cables located in the table.
The cables extend out of the pocket as you gently pull them. Recoil the cables gently using the
recoil button.
Note: For the RealPresence Immersive Studio 21-Seat system, connections are located
in the front table only.
Supported Resolutions and Refresh Rates for Content
Before you share content, check that the computer video output is configured to use one of the supported
resolutions and refresh rates shown in the following table.
For best video quality, use refresh rates of 60 Hz or less. Set the resolution and refresh rates according to
your computer's instructions.
Supported Resolutions and Refresh Rates
Resolution
800 x 600
1024 x 768
1280 x 720
Polycom, Inc.
Refresh Rates (Hz)
56, 60, 72, 75, 85
60, 70, 75, 85
50, 60
15