Recommended Cleaning Procedures; Clean Front Wall Panels And Table Top Surfaces; Clean Camera Cluster Enclosure And Shield - Polycom RealPresence OTX Studio User Manual

Recommended Cleaning Procedures

Topics:
▪

Clean Front Wall Panels and Table Top Surfaces

▪

Clean Camera Cluster Enclosure and Shield

▪ Clean Carpet
▪ Clean Ceiling Microphone Arrays
▪ Clean Chairs
▪ Clean Power Pockets
▪ Clean Displays
▪ Clean Light Fixtures
▪ Clean Tablet
▪ Clean Back Wall Acoustic Panels
Clean your system regularly to ensure proper functionality. Refer to the following detailed cleaning
information.
Note: Do not clean the camera cluster, which is centrally located in front of the media wall within
a camera housing.
Clean Front Wall Panels and Table Top Surfaces
You can clean the font wall panels and table top surfaces with a damp cloth. You can use an all-purpose
cleaner if necessary.
Procedure
1. To remove general soiling and water stains on the laminate surface of the front and back table
tops, use a damp cloth.
If needed, use a hard-surface, all purpose cleaner such as Formula 409
Clean, etc., and follow the manufacturer's instructions.
To prevent staining, ink should be removed as soon as possible. Do not use paint thinners,
naphtha, or solvent-based fluids.
2. Rinse and wipe the laminate surfaces dry after cleaning.
Clean Camera Cluster Enclosure and Shield
You can clean the camera cluster enclosure and shield with water and a neutral detergent.
Polycom, Inc.
® ®
, Fantastik , Top Job, Mr.
18