Lop Position Learning Screen - Arkel ARCODE Quick Installation Manual

Arkel Elektrik Elektronik San. ve Tic. A.Ş.
Figure-18c: LOP position learning screen
LOP learning:

If the car is at bottom floor and LOP display shows "??" or wrong landing floor, you must hold down call button
of LOP until appears correct floor number on LOP screen. For first floor door A you must see "A" "+" and "1"
respectively. If your system has B door you should slide scroll box to right side and hold down call button of
LOP until appears "B" "+" and "1" respectively. The while figure
from COP to second floor after completed definition of first floor. All LOPs must be defined for all floor
according to explanation above.

If LOP doesn't have a screen, you should hold down call button of LOP until figure
on AREM screen. The while led of LOP will flash for a second when landing position is learned.

If the LOPs are used only for display you don't have to do these settings. The display will show floor number
when elevator starts to normal working.
ARKEL

"A" shows defined floor. For B door this sign will
be "B" . "+" means the display is used for landing
call button. If "-" sign appears on screen of LOP,
this means the display is used only display.
will change as figure
52
www.arkel.com.tr
. Give a call
will change as figure
ARCODE