Step-1: Mechanical Installation - Arkel ARCODE Quick Installation Manual

Arkel Elektrik Elektronik San. ve Tic. A.Ş.

Step-1: Mechanical installation

Mount ARCODE control cabinet, brake resistor, battery pack and UPS (if required) to their places.
Figure-2a: ARCODE control panel(Control panel
dimensions and type can change depending on
installation type.
11,5cm
Type-A
32,5cm
Mounting holes
Figure-3: Type-A and Type-B dimensions of brake resistors
ARKEL
Figure-1: Dimensions of battery pack (it is required only when
the inverter is supplied with battery during emergency evacuation)
(it is not used for brake relase emergency evacuation)
15,5cm
18cm
Type-B
Mounting holes
39
16cm
12cm
34cm
Figure-2b: ARCODE
22,5cm
Warning: Mount the brake resistor
horizontally! Don't mount it on
30,5cm
control panel.
www.arkel.com.tr
ARCODE