Floor Resetting; Give A Call By “Cop And Lop Calls” - Arkel ARCODE Quick Installation Manual

Arkel Elektrik Elektronik San. ve Tic. A.Ş.
Figure-16: Floor resetting
Figure-17: give a call by "COP and LOP calls"
ARKEL

Elevator will move bottom floor after completed
shaft learning to reset floor numbers. The car will
appear on screen as shown figure-16 when car
reaches to the bottom floor. The car goes bottom
floor to reset floor number every time when
ARCODE energized first time.

The elevator must be checked by given call whether
it reaches to destination floors or not. To give a call
by AREM there are two methods. Press up or down
button after pressing "F2" button. If you press one
time to direction button the car moves 1 floor up or
down. Given call is determined with the number of
pressed direction buttons.

Second method is press "info" button when AREM
shows main screen (Figure-16).

Select icon of "COP and LOP calls" and press Enter
button.

Use direction arrows to give a call. Press Enter
button. The car will move to given floor.
50
www.arkel.com.tr
ARCODE