Additional Reference Information - Elcometer E130-S Operating Instructions Manual

19 ADDITIONAL REFERENCE INFORMATION

Standards
The Elcometer 130 can be used in accordance with
SSPC GUIDE 15
Certification
Every Elcometer 130 gauge is supplied with a Test Certificate free of
charge. The test measurements are generated using factory reference
calibration verification tiles.
Warranty and Maintenance
The Elcometer 130 does not contain any user serviceable components. In
the unlikely event of a fault, the gauge should be returned to your local
Elcometer supplier or directly to Elcometer. The warranty will be
invalidated if the gauge has been opened.
The Elcometer 130 gauge is supplied with a 1 year warranty against
manufacturing defects. To extend this warranty to 2 years, register your
gauge via the www.elcometer.com website.
Consumable items have a 1 year warranty from the date of purchase
against manufacturing defects only.
This gauge incorporates a Liquid Crystal Display (LCD). If the display
reaches a temperature above 70°C (158°F) it may be damaged. This can
happen if the gauge is left in a car, parked in strong sunlight.
The Elcometer 130 measurement electrodes are gold plated to prevent
corrosion and oxidisation, prolonging the life and accuracy of the gauge.
They should be cleaned using pure water and the sensor wipes supplied.
DO NOT use abrasive materials or chemicals as this will damage the
electrodes.
Always store the gauge in its carrying pouch when not in use.
Remove the batteries from the gauge and store them separately if the
gauge is to remain unused for a long period of time. This will prevent
damage to the gauge in the event of malfunction of the batteries.
59 www.elcometer.com