Elcometer E130-S Operating Instructions Manual page 19

Analogue Bar Graph (T)
By selecting Display/Readings & Bar Graph
the user can view an analogue representation of
the current reading together with the highest
(Hi), lowest (Lo) and average (x) reading. The
graph is updated automatically when each
reading is taken.
The values above the bar graph signify the
m e a s u r e m e n t r a n g e . T h e c u r r e n t
measurement is displayed as a white bar if no
upper limit has been set.
If the upper limit has been set, the current
measurement is displayed as a white if below the
upper limit, and red bar if above. The right arrow
head is also filled red if the current measurement
is above the upper limit.
Run Chart (T)
By selecting Display/Readings & Run Chart the user can view a line
trend graph of the last 20 measurements. The graph is updated
automatically when each reading is taken.
Up to four horizontal axes are displayed representing different values /
statistics as follows:
Highest reading in the batch " "
Ÿ
Lowest reading in the batch "
Ÿ
(for batches of more than one reading)
Mean of readings in the batch "
Ÿ
(for batches of more than one reading)
High limit for the batch "
Ÿ
The readings are displayed as white or red points; white if a reading is
below the limit (or if no limit has been set), and red if above the limit.
Users can choose to show Readings & Selected Stats - see On
Screen Statistics on page 17, Readings & Run Chart, Readings & Bar
Graph or Readings Only. Readings & Run Chart is only available
when in Batching.
www.elcometer.com
"
"
"
(when enabled)
R
18