Elcometer E130-S Operating Instructions Manual page 37

By clicking on the Edit button, users can Delete the gauge from
ElcoMaster™ 2.0, name the gauge by a more familiar identification
(Enter a User ID) or set up the gauge power up display screen
(Change the Welcome screen). See Changing the Welcome Screen
on page 53.
www.elcometer.com
Each salt contamination meter
connected is now listed.
Select the appropriate gauge
Ÿ
and press 'Next >'
If connecting via Bluetooth, the
gauges are identified using the
Bluetooth ID - which can be seen
o n t h e b o t t o m o f t h e
Menu/Bluetooth screen.
Connecting via Bluetooth now
requires the gauge to be 'Paired'
by keying in the gauge's unique
Bluetooth PIN Code. This code
can be found on the bottom of the
Menu/Bluetooth screen.
Type in the Bluetooth PIN
Ÿ
Code and press 'Next >'
ElcoMaster™ 2.0 will now
validate the connection, press
Finish when complete.
The gauge is now connected and
ElcoMaster™ 2.0 will return the
user to the Download action tab,
and display the connected
gauge.
The same gauge can be
connected by more than one
method. Repeat the 'Connect
Gauge' and follow the on screen
prompts.
R
36