Elcometer E130-S Operating Instructions Manual page 35

Connecting an Elcometer gauge to ElcoMaster™2.0 (ST)
In order to download any gauge readings from the Elcometer 130 the
user must first 'Connect the gauge' by clicking the 'Connect Gauge'
button on the Download action tab.
www.elcometer.com
Clicking "Connect Gauge" starts
the ElcoMaster™ 2.0 Gauge
Connect Wizard.
The ElcoMaster™ 2.0 data
management software allows
users to download readings from
a wide range of Elcometer
inspection gauges.
Measurements such as surface
profile, surface cleanliness,
temperature, dewpoint, delta T,
gloss, material thickness and dry
film thickness can all be
downloaded, stored and reported
using the ElcoMaster™ 2.0
software.
These instructions will inform the
user how to download data from an
Elcometer 130 Salt Contamination
Meter. All appropriate Elcometer
gauges can be downloaded in a
similar way.
Select the Surface Cleanliness
Ÿ
tab and press 'Next >'
Select the Elcometer 130 tab
Ÿ
and press 'Next>'
R
34