Elcometer E130-S Operating Instructions Manual page 48

a
The gauge must be connected to ElcoMaster™ 2.0 before it will appear in the list, see pages 34- 36
b
The 'reading' circle will be green if the measurement is within set limits and red, if outside limits.
47
R
Using a Collect Design
Ÿ
Ÿ
Ÿ
A new batch will be created. Unlike
standard batches it will have an
additional tab with the same name as
the Collect Design, click on this to show
your design. To begin collection,
Ÿ
Ÿ
Ÿ
ElcoMaster™ 2.0 will link the selected
gauge and, when ready, display the
gauge information within the Live
Readings window.
Once connected, green arrows will
flash around the first 'reading' circle to
measure. When a measurement is
taken, the 'reading' circle will change to
show the measured value , and the
green arrows will move to the next
reading.
Select the 'View' tab
Select a folder or project and click
the 'New' button
Move the cursor to relevant batch
type, an additional window will
appear, select the required Collect
Design
Click on 'Connect Gauge' in the 'Live
Readings' window
Select a gauge from the list
Select the relevant connection
method
a
b
www.elcometer.com