Elcometer E130-S Operating Instructions Manual page 23

Once all the batch settings have been created, press Batch/New
Batch/Open Batch 1 - where 'Batch 1' may now be a re-named as
required.
Alpha numeric naming batches
The user can rename the batch to a more appropriate name at any
time.
When a new batch is created, the gauge automatically names it
'Batch n' - where 'n' is the next unused batch number; e.g. Batch 1,
Batch 2, Batch 3, etc.
To rename a batch either:
Press Batch/New Batch/Rename Batch 1; or
Ÿ
Press Batch/Edit Batch/Rename Batch and select the Batch to
Ÿ
be renamed from the list of existing batches
The current name of the batch is in white
in the middle of the display with a yellow
'cursor' icon to the right of the name.
Using the left arrow, right arrow and
Select softkeys, the user can rename the
batch as required.
The yellow, raised character or function
is the item that will be 'chosen' by
pressing the Select softkey.
Pressing the Escape softkey at any time cancels the whole
operation without making any changes to the original name.
To store the re-named 'name' highlight OK and press the
Select softkey.
www.elcometer.com
R
22