3.2.3.7 Main Motor (Ml) Removal
Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
1.
from the light or place it in a dark area.
Remove the control panel. (Refer to Section 3.2.l.3.)
2.
3.
Remove the paper cover.
4.
Remove the right cover and left cover. (Refer to Section 3.2.2.)
Remove the top cover.
.5.
Remove the rear frame. (Refer to Section 3.2.2.2.)
6.
7.
Remove 4 CP(S)(P1) screws (M3 x 6) for the main motor (Ml).
Lift the main motor (Ml), and discomect the connector for the main motor (Ml).
8.
3-14
Figure 3-16. Removing the Main Motor
(Ml)
Rev. A