&2/25
EPSON Stylus
1520
3.2.1 Upper Housing Removal
1. Remove the knob, release lever, rear sheet guide, output tray, and paper support.
2. Remove the tractor unit by releasing the hook using tweezers. Then remove it from the printer mechanism
unit by lifting up the rear edge of the tractor unit.
Tractor Unit
3. Open the printer cover and insert the tweezers into the cutouts at the back of the control panel to release
the hooks that secure the control panel to the upper housing. Then disconnect the connector cable and
remove the control panel.
Tweezers
3-4
Hook in the Tractor Unit
Figure 3-2. Tractor Unit Removal
Connector Cable for the Control Panel
Figure 3-3. Control Panel Removal
Tweezers
Control Panel
Upper Housing