3D Systems ProJet 4500 Installation Manual page 21

A. The printer reboots into the CONFIGURATION MENU
Select the NETWORK SETTINGS option.
Press the knob to CONTINUE
B. USE DHCP? is displayed.
Choose NO.
C. IP ADDRESS is displayed.
Rotate the Control Knob to dial the desired number into each field.
Clicking the knob will advance to the next field. Continue until all
fields are entered.
D. SUBNET MASK is displayed.
As before, use the control knob to enter the desired values.
E. The screen returns to the CONFIGURATION MENU.
Choose SAVE AND EXIT.
Press the knob to continue.
The printer reboots and returns to where you left off in the
INSTALLATION MODE.
3D Systems, Inc.
21