3D Systems ProJet 4500 Installation Manual page 15

INSPECT INTERNAL CABLE, FLUID & VACUUM CONNECTIONS
Cable and hose connections can come loose during shipping - It is important to confirm that all connections are properly in place before
applying power or adding fluids.
1. Internal Box Connections
Loosen the four (4) screws that mount the E-box to the Printer
Chassis (not the screws that hold the E-Box cover on).
2. Tilt the E-Box outward until it comes to rest.
Check all cable connections to the E-Box to ensure that
they are securely connected.
3. Check all electrical and fluid connections to Fluid
Reservoirs. Check all electrical and hose connections
to Feeder.
3D Systems, Inc.
15