3D Systems ProJet 4500 Installation Manual page 26

19. Checking that fluid is flowing from the Cartridges into the tanks is
vitally important.Carefully check of each of the internal tanks. Ensure
that each tank is filling and that there are no leaks.
Once no more fluid flows from the cartridges.
Press CONTINUE.
20. Select the units the values will use when displayed on the LCD.
21. The printer will REZERO.
Press CONTINUE.
22. The printer BOOTING screen displays.
23. The FLUID ADVANCE menu displays.
24. The LCD now shows the FLUID FILL MENU.
IMPORTANT: Failure to adhere to the following steps can result
in damage to the Print Heads or fluid entering the air-system.
3D Systems, Inc.
26