How To Install The Machine; Timing Of The Looper To The Needles; Angle For Installing The Looper And Position Of The Looper Holder Bracket - KANSAI SPECIAL DFB1404P Instruction

5 5 5 5 - - - - 2 How to install the machine

2 How to install the machine 2 How to install the machine 2 How to install the machine
【6】TIMING OF THE LOOPER TO THE NEEDLES
6 6 6 6 - - - - 1 Angle for inst

1 Angle for installing the looper and position of the looper holder bracket

1 Angle for inst 1 Angle for inst
Insert the looper into the looper holder until bottom A of the looper touches looper holder
bracket B. Then tighten screw C.
When the looper passes the needle, there should be a clearance of 0~0.1mm between the
point of the looper and the scarf of the needle. Adjustment is made by loosening screw D
and moving the looper holder bracket left or right.
alling the looper and position of the looper holder bracket
alling the looper and position of the looper holder bracket alling the looper and position of the looper holder bracket
17