Specification; Setting Up The Motor; Installing The Synchronizer; Adjusting The Needle Stop Position - KANSAI SPECIAL LX-SP Series Instructions Manual

【1】SPECIFICATION
Machine model
Machine motor

Max. machine speed

Standard needle type
Sequin size
Sewing pattern
Sequin reel size
Power supply for sequin device
【2】SETTING UP THE MOTOR

2-1 Installing the synchronizer

■ I nstall the synchronizer A to the machine pulley and
tighten the screws B temporarily. (Fig.1)
■ S et the position bar C to the guide groove of the
synchronizer A and tighten the nut D. (Fig.1)

2-2 Adjusting the needle stop position

The needle must be at its highest position
■ I n order to align a mark "P" of hand pulley with the
setting mark, adjust the synchronizer A after
loosening the screws B. (Fig.1,2)
2-3 Max. machine speed
600ｒ ｐ ｍ
■ I n case of the sequin size at 7mm, reduce the max. machine speed to 500 rpm.
LX5801（1 needle, double chain stitch）
Servo Motor
600rpm
UY128GAS #14
5mm（Factory Setting）
3mm（Including optional presser foot & guide）
7mm（Including optional presser foot & guide）
1 sequin on every stitches
1 sequin on 2 stitches
〜
1 sequin on 10 stitches（max）
A sequin reel of 180 mm in diameter
AC220V Single-phase
1
(Fig.1)
(Fig.2)
-
-
Ｌ Ｘ Ｓ
Ｌ Ｘ Ｓ
Ｐ s e r i e s
Ｐ s e r i e s