How To Install The Machine; Timing Of The Looper To The Needles; Angle For Installing The Looper And Position Of The Looper Holder Bracket - KANSAI SPECIAL DFB Series Instruction

5 - 2 H o w t o i n s t a l l t h e m a c h i n e
【6】TIMING OF THE LOOPER TO THE NEEDLES
6 - 1 A n g l e f o r i n s t a l l i n g t h e l o o p e r a n d p o s i t i o n o f t h e l o o p e r h o l d e r b r a c k e t
Insert the looper into the looper holder until bottom A of the looper touches looper holder
bracket B. Then tighten screw C.
When the looper passes the needle, there should be a clearance of 0~0.1mm between the
point of the looper and the scarf of the needle. Adjustment is made by loosening screw D
and moving the looper holder bracket left or right.
19