Machine Speed; Machine Speed & Direction In Which The Machine Pulley Runs; Motor & Belt - KANSAI SPECIAL DFB1404P Instruction

【3】MACHINE SPEED
3 3 3 3 - - - - 1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs
Refer to the table below for maximum and standard
speeds of the Series. To extend machine life, run
the machine approximately 15~20% below the
maximum speed for the first 200 hours of operation
(approx. 1 month). Then run the machine at the
standard speed.
counterclockwise as seen from the end of the
machine pulley.
3 3 3 3 - - - - 2 Motor & belt 2 Motor & belt
2 Motor & belt 2 Motor & belt
Motor : 3-phase, 2-pole, 400W clutch motor
Belt : M type V belt
Select the proper motor pulley according to the
machine speed (refer to the motor pulley outer
diameter on the table below). Adjust the position
of the motor by pressing the finger onto the middle
of the belt so that 1~2cm deflection can be achieved
(see the illustration on the right).
< Machine speed >
Model
DFB1404P
DFB1412P
< Motor pulley selection table >
Motor pulley
outer diameter
(mm)
60
70
80
90
100
110
The machine pulley turns
Maximum speed Standard speed
4500
4000
Machine speed (SPM)
50Hz 60Hz
3150 2950
2300 3450
3300 3900
3700 4400
4100 (4900)
4500 (5400)
4000
3500
10