Table of Contents
Advertisement
Chapter 1- Hardware Description
Safety Requirements
Site Safety Requirements
1-8
This section describes the requirements your site must meet for safe
installation and operation of the system.
For your protection, please read these safety instructions completely
before operating the equipment.
•
Look carefully for potential hazards in your work area: moist floors,
ungrounded power cables, frayed power cords, missing safety
grounds and so forth.
•
Locate the main circuit breaker within the room.
•
Locate the emergency power OFF switch within the room.
•
Never assume that power is disconnected from a circuit.
•
Use only the power cords supplied with the system.
•
Each power cord should only be connected to a power outlet that has
a protective ground contact.
•
Ensure that power cords are easily accessible from the back of the
system at all times.
•
Place the equipment in a well-ventilated area where the vents are free
from obstruction.
•
Do not place heavy objects directly on top of the RMX 4000 unit.
•
Do not use liquids around your equipment.
•
Keep the area around the RMX 4000 clean and free of clutter.
•
Decide on a suitable location for the equipment rack that will hold the
RMX 4000 unit. It should be situated in a clean, dust-free area that is
well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. You will also need it placed
near a grounded power outlet.
Advertisement
Table of Contents
Need help?
Do you have a question about the DOC2559B and is the answer not in the manual?
Questions and answers