Setting User Group Password Control Parameters - HP FlexFabric 5700 Series Security Configuration Manual

Step
4. Set the minimum password
length.
5. Configure the password
composition policy.
6. Configure the password
complexity checking policy.
7. Set the maximum number of
history password records for
each user.
8. Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
9. Set the number of days during
which a user is notified of the
pending password expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the maximum account idle
time.

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and enter
user group view.
3. Configure the password
expiration time for the user
group.
Command
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control history
max-record-num
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control login idle-time
idle-time
Command
system-view
user-group group-name
password-control aging aging-time
199
Remarks
•
In non-FIPS mode, the default
setting is 10 characters.
•
In FIPS mode, the default length
is 15 characters.
•
In non-FIPS mode, by default, a
password must contain at least
one character type and at least
one character for each type.
•
In FIPS mode, by default, a
password must contain at least
four character types and at
least one character for each
type.
By default, the system does not
perform password complexity
checking.
The default setting is 4.
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for 1
minute before trying again.
The default setting is 7 days.
By default, a user can log in three
times within 30 days after the
password expires.
The default setting is 90 days.
Remarks
N/A
By default, no user group exists.
For information about how to
configure a user group, see
"Configuring AAA."
By default, the password
expiration time of the user group
equals the global password
expiration time.