Accounting Using A Radius Server - Cisco 500 Series Administration Manual

Security
Configuring RADIUS
Cisco 500 Series Stackable Managed Switch Administration Guide
An organization can establish a Remote Authorization Dial-In User Service
(RADIUS) server to provide centralized 802.1X or MAC-based network access
control for all of its devices. In this way, authentication and authorization can be
handled on a single server for all devices in the organization.
The device can act as a RADIUS client that uses the RADIUS server for the
following services:
• Authentication—Provides authentication of regular and 802.1X users
logging onto the device by using usernames and user-defined passwords.
• Authorization—Performed at login. After the authentication session is
completed, an authorization session starts using the authenticated
username. The RADIUS server then checks user privileges.
• Accounting—Enable accounting of login sessions using the RADIUS server.
This enables a system administrator to generate accounting reports from
the RADIUS server.

Accounting Using a RADIUS Server

The user can enable accounting of login sessions using a RADIUS server.
The user-configurable, TCP port used for RADIUS server accounting is the same
TCP port that is used for RADIUS server authentication and authorization.
Defaults
The following defaults are relevant to this feature:
• No default RADIUS server is defined by default.
• If you configure a RADIUS server, the accounting feature is disabled by
default.
Interactions With Other Features
You cannot enable accounting on both a RADIUS and TACACS+ server.
21
438