Cisco 500 Series Administration Manual page 528

Security: IPv6 First Hop Security
Common Tasks
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 500 Series Stackable Managed Switch Administration Guide
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
DHCPv6 Guard Work Flow
In the DHCPv6 Guard Settings page, enter the list of VLANs on which this feature is
enabled.
In this same page, set the global configuration values that are used if no values are
set in a policy.
If required, either configure a user-defined policy or add rules to the default
policies for the feature.
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Neighbor Discovery Inspection Work Flow
In the ND Inspection Settings page, enter the list of VLANs on which this feature is
enabled.
In this same page, set the global configuration values that are used if no values are
set in a policy.
If required, either configure a user-defined policy or add rules to the default
policies for the feature.
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Neighbor Binding Work Flow
In the Neighbor Bindings Settings page, enter the list of VLANs on which this
feature is enabled.
In this same page, set the global configuration values that are used if no values are
set in a policy.
If required, either configure a user-defined policy or add rules the default policies
for the feature.
Add any manual entries required in the Neighbor Binding Table page
23
526