Cisco 500 Series Administration Manual page 284

VLAN Management
Voice VLAN
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
Workflow1: To configure Auto Voice VLAN:
Open the VLAN Management > Voice VLAN > Properties page.
Select the Voice VLAN ID. It cannot be set to VLAN ID 1 (this step is not required for
dynamic Voice VLAN).
Set Dynamic Voice VLAN to Enable Auto Voice VLAN.
Select the Auto Voice VLAN Activation method.
If the device is currently in Telephony OUI mode, you must disable it
NOTE
before you can configure Auto Voice Vlan
Click Apply.
Configure Smartports as described in the
Configure LLDP/CDP as described in the
CDP sections, respectively.
Enable the Smartport feature on the relevant ports using the Smartport > Interface
Settings page.
Step 7 and Step 8 are optional as they are enabled by default.
NOTE
Workflow2: To configure the Telephony OUI Method
Open the VLAN Management > Voice VLAN > Properties page. Set Dynamic Voice
VLAN to Enable Telephony OUI.
If the device is currently in Auto Voice VLAN mode, you must disable
NOTE
it before you can enable Telephony OUI.
Configure Telephony OUI in the Telephony OUI page.
Configure Telephony OUI VLAN membership for ports in the Telephony OUI
Interface page.
Common Smartport Tasks
Configuring LLDP and
14
section.
Configuring
282